02.12.2019

Generlink Meter Mounted Transfer Switch User Manual

44

Oct 08, 2018  Duromax XP12000EH generator running entire house using a Generlink automatic transfer switch. UPDATE: My power company was supposed to charge me $4 a month fee to rent the Generlink. Mar 18, 2013  GenerLink Demonstration with user testimonials. Power your home's circuit panel in case of blackout with the affordable and easy-to-use GenerLink. Interlock vs. Transfer Switch.

  1. Generlink Problems

Looking for an easy, inexpensive way to connect your portable generator to your home? The Generlink meter mounted transfer switch might just be the ticket you’re looking for. In this review, we’ll have a look at the price, ease of installation and the pros and cons of the Generlink transfer switch. Whether you’re in the USA or Canada, there are many states and provinces that have approved this meter mounted transfer switch as a means for easy back-up power connection in case of main grid power loss.

When the Generlink is installed and the power goes out, all you have to do is simply turn off your electrical devices via your breaker panel, connect your portable generator, fire it up and turn on the devices you wish to operate from your breaker panel– easy as that.

>Click Here to Check Price and Reviews on Amazon<

What is a Generlink Transfer Switch?

The Generlink transfer switch is mounted directly behind your electrical power meter. There is one connector on the underside of the transfer switch where you’ll connect your generator with a supplied power cord. There’s no need for a separately mounted transfer switch and power supply panel, as the Generlink eliminates the need for both of these units. All that’s needed is the Generlink and your portable generator to supply power to your home while off grid.

The Generlink transfer switch allows you to use ALL of your existing appliances and electrical circuits within your house. With traditional type transfer switches, most allow the use of just a few circuits. Essentially, the Generlink transfer switch is an all-in-one solution for people wondering how to hook up their generator to the house without a traditional transfer switch.

>Click Here to Check Price and Reviews on Amazon<

How Much Does the Generlink Cost?

Total costs for the Generlink, including installation fees, average around $1500. This may seem high, however the process is much less extensive than installing a traditional in home back-up power transfer switch. The Generlink itself costs between $600-800 depending on the features and specs, so the cost of the actual unit makes up for about half of the total cost including installation.
Is the price worth the convenience? If you ask us and people who have installed the Generlink, yes absolutely. The Generlinks’ price and installation are very much worth the price if you’re looking for a reliable and convenient way to connect your portable generator to your house without too much hassle. Installation is fairly quick and easy (a couple of hours) and the whole operation takes less than 5 minutes to set up when the main power grid goes out. When the power goes out, simply turn off your main breakers, connect and turn on your portable generator and power it on. Once your generator is powered up, simply flick on the breakers to operate their respective appliances/circuits, and you’re good to go.

>Click Here to Check Price and Reviews on Amazon<

Generlink Installation

Installation of the Generlink is very simple. However, you’ll be required to contact your electrical service provider to set up a time to connect/disconnect your meter from the main power grid. This is itself can vary in cost – some have reported upwards of $800. You’ll also be required to hire a licensed electrician to install the Generlink to your meter, which can also run up the costs. Even though the upfront costs can be significant, the price vs. convenience factor tends to tip towards convenience. Once the Generlink meter mounted transfer switch is installed, it’s simply plug in and forget once it’s installed. No need to worry about dangerous back feeding once the main power returns.

Is the Generlink worth the price? The general consensus is a resounding YES. When it comes to main grid power loss, the Generlink transfer switch is the way to go. Simply plug in your portable back-up generator, and you’re powered up and good to go.

Trending Topics

  • 1
  • 1
  • Share
  • 1

The GenerLink transfer switch comes in two models, MA23 and MA24. The MA23 model can handle up to 30 amps coming from the portable generator and the MA24 can handle up to 40 amps.

The size of your generator will dictate the model of GenerLink you need. The MA23 model can handle generators that produce up to 8,500 watts. The MA24 model can handle generators that produce up to 10,000 watts. Malwarebytes free version download.

You can add 75kA per phase surge protection built in to the GenerLink to protect all your white appliances from a surge. The surge module has an audible alarm so you will know when you have taken a hit!

MA23-N

30-amp GenerLink with no surge protection built in.

MA23-S

30-amp GenerLink with 75kA per phase surge protection built in

MA24-N

40-amp GenerLink with no surge protection built in

MA24-S

40-amp GenerLink with 75kA per phase surge protection built in


The GenerLok is our custom made power cable that connects a portable generator to the GenerLink.

Length Options

Measure the distance between your generator and the GenerLink to determine what length of cord you will need. We include a 20-foot GenerLok cable for free with the GenerLink. We offer 40, 60, 80, or 100 foot cords which will be premade and ship with your GenerLink.

Plug Options

We offer 3 plug options for the GenerLok cord. The L14-20 plug can handle up to 20 amps. The L14-30 plug can handle up to 30 amps. The 14-50 plug can handle up to 50 amps. Make sure to select the appropriate plug option that will work with your generator.