um5puv.netlify.com

1. Asus Eee Box Drivers
2. Asus Eee Box
3. Asus Eee Box B202 Manual

English

Eee Box PC

View and Download Asus Eee Box EB1012P user manual online. Eee Box B2 /EB Series PC. Eee Box EB1012P Desktop pdf manual download. Also for: Eb1012-b0010, Eb1012p-b007g, Eb1012p-b022e, Eb1012p-b0320, Eb1012p-b015g, Eb1007-b0200, Eeebox eb1012p, Eeebox b202. With the Eee Box HD's Easy Mode, using Windows® has never been easier. The intuitive graphical user interface makes finding and running the Eee Box HD's programs a breeze. To further sweeten the deal, the Eee Box HD also comes with a fully-customizable program launch shortcut bar found on the Windows® desktop—Eee Bar. Atmel Studio. Connect AVR ISP mkii - The ASUS EEE BOX EB1012P MANUAL. ASUS P5GD2-X. Asus dr 900 ebook reader, asus eb1007 eeebox pc, asus ebook reader app, asus ebook asus eee box 8202, asus eee box b202, asus eee box drivers, asus eee box eb1007, asus eee box eb1007p, asus eee box eb1012p, asus eee box. 5 inches h x w x d asus.

User Manual

E5398

Second Edition V2

February 2010

Copyright © 2010 ASUSTeK COMPUTER INC. All Rights Reserved.

No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or

translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER, INC. (“ASUS”).

Products and corporate names mentioned in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used for identification purposes only. All trademarks are the property of their

respective owners.

Every effort has been made to ensure that the contents of this manual are correct and up to date. However, the manufacturer makes no guarantee regarding the accuracy of its contents, and reserves the right to make changes without prior notice.

Eee Box PC

Notices

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

•This device may not cause harmful interference, and

•This device must accept any interference received including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly

approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.

This class B digital apparatus complies with Canadian ICES-003.

REACH

Complying with the REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals) regulatory framework, we publish the chemical substances in our products at ASUS REACH website at http://green.asus.com/english/REACH.htm.

Eee Box PC

Safety information

Your Eee Box PC is designed and tested to meet the latest standards of safety for information technology equipment. However, to ensure your safety, it is important that you read the following safety instructions.

Setting up your system

•Read and follow all instructions in the documentation before you operate your system.

•Do not use this product near water or a heated source such as a radiator.

•Set up the system on a stable surface with the provided stand. Never use the system alone without the stand.

•Openings on the chassis are for ventilation. Do not block or cover these openings. Make sure you leave plenty of space around the system for ventilation. Never insert objects of any kind into the ventilation openings.

•Use this product in environments with ambient temperatures between 0˚C and 35˚C.

•If you use an extension cord, make sure that the total ampere rating of the devices plugged into the extension cord does not exceed its ampere rating.

Care during use

•Do not walk on the power cord or allow anything to rest on it.

•Do not spill water or any other liquids on your system.

•When the system is turned off, a small amount of electrical current still flows. Always unplug all power, modem, and network cables from the power outlets before cleaning the system.

•If you encounter the following technical problems with the product, unplug the power cord and contact a qualified service technician or your retailer.

• The power cord or plug is damaged.

Lithium-Ion Battery Warning

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.

LASER PRODUCT WARNING

CLASS 1 LASER PRODUCT

NO DISASSEMBLY The warranty does not apply to the products that have been disassembled by users

DO NOT throw the Eee Box PC in municipal waste.This product has been designed to enable proper reuse of parts and recycling.This symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment, and mercury-containing button cell battery) should not be placed in municipal waste. Check local technical support services for product recycling.

DO NOT throw the battery in municipal waste.This symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste. Check local technical support services for battery replacement.

European Union Eco-label

This Eee Box PC has been awarded the EU Flower label, which means that this product has the following characteristics:

1.Decreased energy consumption during use and stand-by modes.

2.Limited use of toxic heavy metals.

3.Limited use of substances harmful to the environment and health.

4.Reduction of the use of natural resources by encouraging recycling.

5.Extended product lifetime through the availability of spare parts.

6.Reduced solid waste through takeback policy.

For more information on the EU Flower label, please visit the European Union Eco-label website at http://europa.eu.int/ecolabel.

Takeback and Recycling

Old computers, notebook computers, and other electronic equipment contain hazardous chemicals that are harmful to the environment when disposed in a landfill with trash. By recycling the metals, plastics, and components found in an old computer will be broken down and reused to make new products. And, the environment is protected from any uncontrolled release of harmful chemicals.

ASUS works with recycling vendors with the highest standards for protecting our environment, ensuring worker safety, and complying with global environmental laws. Our commitment to recycling our old equipment grows out of our work to protect the environment in many ways.

For further information about ASUS product recycling and contacts, please visit GreenASUS Takeback and Recycling page (http://green. asus.com/english/takeback.htm)

Eee Box PC

Notes for this manual

To make sure that you perform certain tasks properly, take note of the following symbols used throughout this manual.

WARNING: Vital information that you MUST follow to prevent injury to yourself.

IMPORTANT: Instructions that you MUST follow to complete a task.

TIP: Tips and useful information that help you complete a task.

NOTE: Additional information for special situations.

Eee Box PC

Welcome

Congratulations on your purchase of the Eee Box PC.The following illustration displays the package contents of your new Eee Box PC. If any of the below items is damaged or missing, contact your retailer.

Package contents

If the device or its components fail or malfunction during normal and proper use within the warranty period, bring the warranty card to the ASUS Service Center for replacement of the defective components.

Knowing your Eee Box PC

Front view

Refer to the diagram below to identify the components on this side of the system.

1

2

3

4

5

6

1 Hard disk LED

The hard disk LED blinks when data is being written into or read from the hard disk drive.

2 Power switch

The power switch allows powering ON and OFF the system.

3 Memory card slot

The built-in memory card reader reads MMC/SD/SDHC/MS/ MS Pro cards used in devices like digital cameras, MP3 players, mobile phones, and PDAs.

Eee Box PC 11

4 USB port

The USB (Universal Serial Bus) port is compatible with USB devices such as keyboards, mouse devices, cameras, and hard disk drives. USB allows many devices to run simultaneously on a single computer, with some peripheral acting as additional plug-in sites or hubs.

5 Headphone/Audio Out jack

The stereo headphone jack (3.5mm) is used to connect the system’s audio out signal to amplified speakers or headphones.

6 Microphone jack

The microphone jack is designed to connect the microphone used for video conferencing, voice narrations, or simple audio recordings.

Rear view

Refer to the diagram below to identify the components on this side of the system.

1

2

3

4

5

6

The jack is used to connect the supplied wireless antenna to enhance wireless signal reception.

2 Power input (DC 12V / DC 19V)

The supplied power adapter converts AC power to DC power for use with this jack. Power supplied through this jack supplies power to the PC.To prevent damage to the PC, always use the supplied power adapter.

The power adapter may become warm to hot when in use. Do not cover the adapter and keep it away from your body.

Eee Box PC 13

3 DVI port

The Digital Visual Interface (DVI) port supports a high quality VGA-compatible device such as a monitor or projector to allow viewing on a larger external display.

4 USB port

The USB (Universal Serial Bus) port is compatible with USB devices such as keyboards, mouse devices, cameras, and hard disk drives. USB allows many devices to run simultaneously on a single computer, with some peripheral acting as additional plug-in sites or hubs.

5 LAN port

The eight-pin RJ-45 LAN port supports a standard Ethernet cable for connection to a local network.

6 Audio Out (S/PDIF Out) jack

Plug an 3.5mm mini-jack audio cable into this jack for analog or digital audio transfer.

For S/PDIF Out function, use the supplied mini jack to S/PDIF adapter to connect to your amplifier.

Infocus driver download. USER’S GUIDE X2 MULTI-USE PERFORMANCE InFocus Corporation 27700B SW Parkway Avenue Wilsonville, Oregon. InFocus reserves the right to alter product offerings and specifications at any time. Refer to this manual for proper startup and shutdown procedures. X2 Service Manual. Page 29: Leveling Foot ♦ Replace the retainer in the groove at the top of the leveling foot shaft. Make sure the retainer fully seats. ♦ Adjust the leveling foot so that it is level with the bottom of the projector. X2 Service Manual. Download InFocus X2 User Manual. InFocus X2: User Manual Brand: InFocus Category: Projector Size: 1.75 MB Pages: 45. Please, tick the box below to get your link: Get manual. Related Manuals for InFocus X2. Projector InFocus X2 Service Manual 67 pages. Projector InFocus X2 User Manual 49 pages. View and Download InFocus X2 user manual online. MULTI-USE PERFORMANCE. X2 Projector pdf manual download.

Positioning your Eee Box PC

Installing the stand

Erect your Eee Box PC with the supplied stand.To do so:

1.Locate the screw hole on the bottom of the Eee Box PC.

2.Align the stand screw to the PC screw hole, and then secure the stand to the PC with a coin.

Eee Box PC bottom view

1

Screw hole

Stand screw

2

Do not place your Eee Box PC on the desktop without the stand.

Installing your Eee Box PC to a monitor

You can also install your Eee Box PC to the back of a monitor.To do so:

1.Secure the VESA mount (optional accessory) to your monitor with four screws (HNM/M4 x 8).

To fasten the VESA mount, your monitor must comply with VESA75 or VESA100 standard.

2.Place your Eee Box PC on the VESA mount noting the correct alignment, and then secure the PC to the VESA mount with a coin.

16 Eee Box PC

Setting up your Eee Box PC

You need to connect peripherals before using your Eee Box PC.

Connecting to a display

Connect one end of a DVI cable to the display 1 ) and the other end to the DVI port on the system rear panel 2 ).

2

1

Connecting to USB devices

Connect USB devices like keyboards, mouse devices, and printers to the USB ports on the system rear panel.

Connecting to a network device

Connect one end of a network cable to the LAN port on the system rear panel and the other end to a hub or switch.

Network cable with RJ-45 connectors

Network hub or switch

Turning on the system

Connect the supplied AC adapter to the DC IN jack on the system rear panel, and then press the power switch on the front panel to turn on the system.

3

1

•When your Eee Box PC is not in use, unplug the power adapter or switch off the AC outlet to save on power consumption.

•Adjust the power management settings in the Window® Control Panel.This is to ensure that your Eee Box PC is set to a low power consumption mode and is fully operational at the same time.

To enter the BIOS setup, press <F2> repeatedly during bootup.

Eee Box PC 19

Using your Eee Box PC

Configuring wireless connection

To connect to a wireless network, follow the instructions below:

Connect the supplied wireless antenna to your Eee Box PC to enhance wireless signal reception.

For security concerns, DO NOT connect to an unsecured network. Otherwise, the transmitted information without encryption might be visible to others.

2.Select the wireless network you want to connect to from the list and click Connect.

Enter the network security key if necessary.

3.After connection was established, you will see

Connected.

Configuring wired connection

To establish a wired network, follow the instructions below:

Using a static IP

1.Right-click the network icon on the notification area and select Open Network Connections.

2.Right-clickLocal Area Connection and select Properties.

3.Hightlight Internet Protocol (TCP/IP) and click Properties.

Eee Box PC 21

4.Select Use the following IP address.

5.Enter your IP address,

Subnet mask and Default gateway.

6.If needed, enter the

Preferred DNS server address.

7.After entering all of the related values, click OK to finish the configuration.

Using a dynamic IP (PPPoE connection)

1.Repeat Step 1–3 in the previous section.

2Select Obtain an IP address automatically and click OK.

3.Click Create a new connection to start the New Connection Wizard.

4.Click Next.

6.Select Set up my connection manually.

8.Enter your ISP Name and click Next.

5.Select Connect to the Internet and click Next.

7.Select your connection type and click Next.

9.Enter your User name and Password. Click Next.

Eee Box PC 23

10.Click Finish to finish the configuration.

11.Enter your user name and password. Click Connect to connect to the Internet.

Contact your Internet Service Provider (ISP) if you have problems connecting to the network.

ASUS Easy Update

ASUS Easy Update is a software tool that automatically detects and downloads the latest BIOS, drivers, and applications for your

Eee Box PC.

1.From the Windows® notification area, right-click the ASUS Easy Update icon.

2.Select Schedule to set how often you want to update your system.

3.Select Update to activate the

update.

4.Click OK to display the items you can download.

5.Check the item(s) you want to download, and then click OK.

Eee Box PC 25

Recovering your system

Using the recovery DVD

The recovery DVD includes an image of the operating system installed on your system at the factory.The recovery DVD provides a comprehensive recovery solution that quickly restores your system to its original working state, provided that your hard disk drive is in good working order. Before using the recovery DVD, copy your data files (such as Outlook PST files) to a USB device or to a network drive and make note of any customized configuration settings (such as network settings).

You must connect an external USB DVD-ROM to your computer before inserting the recovery DVD and support CD.

1.Turn on your computer and press <F8> to enter the Please select boot device menu.

2.Insert the recovery DVD into the optical drive and select the optical drive (“DVDROM: XXX”) as the boot device. Press <Enter> and then press any key to continue.

3.The ASUS Recovery DVD window appears. Select where to install a new system (min. 20GB space is required). Options are:

Recover system to a partition

This option will delete only the partition you select from below, allowing you to keep other partitions. Select a partition and click NEXT.

Recover system to entire HD

This option will delete all partitions from your hard disk drive and restore factory settings. Select and click Yes.

4.Follow the on-screen instructions to complete the recovery process.

You will lose all your data during the system recovery. Make sure that you make a backup of it before recovering the system.

This recovery DVD is for Eee Box PC only. DO NOT use it on other computers.Visit the ASUS website www.asus.com for any updates.

Using the hidden partition

The recovery partition includes an image of the operating system, drivers, and utilities installed on your system at the factory.The recovery partition provides a comprehensive recovery solution that quickly restores your system’s software to its original working state, provided that your hard disk drive is in good working order. Before using the recovery partition, copy your data files (such as Outlook PST files) to floppy disks or to a network drive and make note of any customized configuration settings (such as network settings).

DO NOT delete the partition named “RECOVERY.”The recovery partition is created at the factory and cannot be restored by the user if deleted.Take your system to an authorized ASUS service center if you have problems with the recovery process.

1.Press <F9> during bootup (requires a recovery partition).

2.The ASUS Recovery System window appears. Select Recover system to a partition.

3.Select a partition with min. 20GB space and click Next.

4.Follow the on-screen instructions to complete the recovery process.

5.Restart the computer after the system recovery is completed.

6.Set up your language, time zone, keyboard, computer name, and user name to enter the Windows® OS.

ASUS contact information

ASUSTeK COMPUTER INC.

Technical Support

ASUS COMPUTER INTERNATIONAL (America)

Asus Eee Box Drivers

Technical Support

ASUS COMPUTER GmbH (Germany and Austria)

Asus Eee Box

Technical Support

Asus Eee Box B202 Manual